Is the iENYRID M4 Pro S+ Waterproof? Know The Facts

You want to know whether the iENYRID M4 Pro S+ can handle wet weather without damage.

The scooter has an IP54 rating, which means it resists splashes and light rain but is not fully waterproof for riding through heavy rain or deep puddles.

You’ll learn how IP ratings work, what parts of the scooter the rating covers, and simple checks to see if your model stays safe in damp conditions.

That will help you decide when it’s okay to ride and when to wait for drier weather.

Is the iENYRID M4 Pro waterproof?

The iENYRID M4 Pro series uses an IP rating to show water resistance.

Most listings and the manufacturer state an IP54 or IPX4 level, depending on the model and region. 

That means the scooter resists splashes and light water exposure, not full submersion.

You can ride it in light rain or past shallow puddles, but avoid heavy rain and deep water.

Water on the deck, cables, or connectors can still cause damage or electrical faults if it gets inside sensitive parts.

Keep these simple care steps in mind:

• Avoid riding through deep puddles or standing water.
• Dry the scooter after wet use, especially the display, battery compartment, and folding mechanisms.
• Check seals and connectors regularly for wear or gaps.

If you plan to store the scooter outdoors, keep it under cover or use a waterproof but breathable cover.

Manufacturer warranties often limit coverage for water-related damage, so follow their care advice to protect your scooter and your warranty.

How do I know if my electric scooter is waterproof?

Check the scooter's IP rating first. The IP code has two digits: the first for dust, the second for water. Higher numbers mean better protection.

Look for the second digit to assess water resistance. For example, IP54 means splash-resistant from any direction but not safe for submersion.

IP67 or IP68 indicates much stronger water protection and may survive short-term immersion.

Read the user manual and product spec sheet. Manufacturers usually state the IP rating and any limits, such as "do not ride through deep puddles" or "avoid heavy rain." Warranty terms often exclude water damage, so check those details too.

Inspect seals and exposed parts on the scooter. Rubber gaskets, sealed battery compartments, and covered ports improve water resistance.

Loose wiring, open seams, or unmatched covers reduce protection and increase risk.

Test carefully only if the manual allows it. A light spray test or short exposure to splashes can confirm resistance, but avoid deliberate submersion.

If you’re unsure, contact the manufacturer or an authorised dealer for clarification.

Keep a simple checklist:

• IP rating on label or manual
• Seals, covered ports, and cable routing
• Manufacturer guidance and warranty terms
• Visual inspection for corrosion or gaps

These steps help you judge real-world waterproofing and avoid damage from wet conditions.

Waterproof and Weather Resistance Details

The iENYRID M4 Pro S+ carries a rated water resistance and some build features that help against splashes and light rain.

You should still avoid deep water, heavy rain, or prolonged exposure that could reach electrical parts or the battery.

iENYRID M4 Pro S+ IP54 Rating Explained

The M4 Pro S+ is commonly listed with an IP54 or IPX4-style rating depending on the model and listing.

IP54 means the scooter is protected against dust to a limited degree and against water splashes from any direction.

This covers light rain, puddle spray, and road spray while commuting.

IP54 does not mean waterproof. It does not protect electronics from immersion or strong jets of water.

The 48V 12.5Ah battery, motor housings, and display have some sealing, but seals and grommets can degrade over time. 

Models marketed as “Max” or 2024/2025 versions still share the same splash protection in most listings, not full submersion resistance.

Riding in Rain and Wet Conditions

You can ride the M4 Pro S+ in light rain, but keep speed and caution in mind. Wet tyres reduce grip; braking distances lengthen.

Avoid deep puddles, flooded roads, and fast-flowing water that could reach the deck, battery compartment, or motor cavities.

Lights and wiring can be affected by repeated wet rides. If you ride in wet weather, dry the scooter after use and park it somewhere sheltered.

For long-range or off-road models, like the M4 Pro S+ Max, designers add sturdier suspension and tyres, but the same splash-level water resistance applies.

Water Exposure Precautions

Follow simple steps to protect your scooter: do not ride through standing water over the deck height, avoid pressure-washing, and do not submerge the battery or controller.

Use a damp cloth to clean; never spray directly into seams, connectors, or the display.

Check seals and cable entry points regularly, especially if you use the scooter in mixed weather.

If water contacts the battery or motor, turn the scooter off and let the components dry fully before charging. 

These steps will help your cheap electric scooter or long-range electric scooter last longer and keep electrical systems safe.

Will my electric scooter get ruined in the rain?

If your M4 Pro S+ has an IP54 rating, it is splash-resistant but not waterproof.

That means light rain and road spray should not immediately damage the scooter, but heavy downpours and puddles can cause problems.

Water can enter seals, connectors, or the battery compartment over time. Even occasional wet rides raise the risk of corrosion, shortened component life, or electrical faults if moisture reaches sensitive parts.

You should avoid deep puddles and riding through standing water.

Slower speeds and gentle braking help reduce the chance of slipping and minimise water spray into the motor and wiring.

After riding in wet conditions, dry the scooter as soon as you can. Wipe down exposed metal and joints, check connectors for moisture, and let the battery area air-dry before storing indoors.

Use simple preventive steps to protect your scooter:

• Cover the scooter when parked outside.
• Inspect seals and cables regularly.
• Apply light anti-corrosion spray to exposed metal (avoid electrical contacts).

Taking these actions will lower the chance that rain ruins your scooter, but avoiding prolonged or heavy exposure to water remains the safest approach.

Conclusion

You should treat the iENYRID M4 Pro S+ as splash-resistant, not fully waterproof.

The scooter’s electronics and build offer some protection against light rain and puddle splashes, but sustained exposure will raise the risk of damage.

Avoid riding through deep water or heavy downpours. Water can reach electrical components, the battery, or bearings and cause corrosion or short circuits over time.

If you need to ride in wet conditions, take simple precautions. Use a waterproof cover for storage, dry the scooter after use, and check connectors and brakes regularly for moisture or rust.